Posted on

Mercruiser 165 Inline 6 Manual

download free patch vietnam update 132

MerCruiser 4.3L V6 Sterndrive Engines The 4.3L V6 Engine was not the 1st 6 cylinder Sterndrive engine offered by MerCruiser. The Inline 6 cylinder engines date back to the 1963 with the 194 model. During the 1970's MerCruiser offered the 225 Cu-In inline 6 cylinder engine which many engine parts are still available today and easy to find using our MerCruiser OEM parts lookup Diagrams and Catalogs. Chrysler 115hp Outboard Workshop Manual. You will find common maintenance items including oils, lubricants and complete tune up kits as well as By far the most popular engine today in the 6 cylinder engine family is the MerCruiser 4.3 which is offered only within the Sterndrive Engine model family. The original 4.3L Engine Model was released around 1985 as a non-balanced-shaft engine in the carbureted engine model family. This original version of MerCruiser 4.3 Engine was equipped with a however in 1992 with Gen II series engines the fuel system was upgraded to include an as well as due to the introduction of the engine design to address the inherant vibration issues associated with 90 degree V6 engine configurations.

In 2014 MerCruiser released their which will be used to phase out the 4.3L V6 engine models over the next few years as GM discontinues production on this model. Locating and ordering MerCruiser 4.3 engine parts and accessories has never been easier than with the interactive parts catalogs. You no longer have to go to the dealership and wait while someone looks up parts for you. Rather by using our convenient and fast 4.3 Engine Parts Lookup Catalogs you can shop and buy the parts you need from the convenience of your own home. MerCruiser 4.3 Engine Technical Articles and Information • 4.3L 6 Cylinder Engine Performance Specifications.

• 4.3L 6 Cylinder Engine Technical Specifications. • 4.3L 6 Cylinder Engine Fastener Torque Specifications. • 4.3L V6 Bobtail Engine Replacement Options. • 4.3L V6 Engine Longblock Options. • 6 Cylinder Engine Block Code Identification. • Remanufactured 6 Cylinder Longblock Options.

Test running 165 HP inline 6 cylinder freshwater cooled Mercruiser at 2000 rpm after new gaskets, service and tune up. Motor is starboard engine from 1978 Be.

Boatinfo requires FlashPlayer 9 or newer to display this document! SERVICE MANUAL Number 1 Stern Drive Units and Marine Engines 90-68648 286 ©Brunswick Corp. 1986 Printed in U.S.A. Notice to Users of This Manual This service manual has been written and published by the service department of Mercury Marine to aid our dealers' mechanics and company service personnel when servicing the products described herein. It is assumed that these personnel are familiar with the servicing procedures of these products, or like or similar products manufactured and marketed by Mercury Marine. That they have been trained in the recommended servicing procedures of these products which includes the use of mechanics common hand tools and the special Mercury Marine or recommended tools from other suppliers. We could not possibly know of and advise the service trade of all conceivable procedures by which a service might be performed and of the possible hazards and/or results of each method.

We have not undertaken any such wide evaluation. Therefore, anyone who uses a service procedure and/or tool, which is not recommended by the manufacturer, first must completely satisfy himself that neither his nor the product's safety will be endangered by the service procedure selected.

All information, illustrations and specifications contained in this manual are based on the latest product information available at time of publication. It should be kept in mind, while working on the product, that the electrical system and ignition system is capable of violent and damaging short circuits or severe electrical shocks.

When performing any work where electrical terminals could possibly be grounded or touched by the mechanic, the battery cables should be disconnected at the battery. Any time the intake or exhaust openings are exposed during service they should be covered to protect against accidental entrance of foreign material which could enter the cylinders and cause extensive internal damage when the engine is started. 2017 Nissan Primera Owners Manual.

It is important to note that, during any maintenance procedure, replacement fasteners must have the same measurements and strength as those removed, whether metric or customary. (Numbers on the heads of the metric bolts and on surfaces of metric nuts indicate theirstrength.

Customary bolts use radial lines for this purpose, while most customary nuts do not have strength markings. Mismatched or incorrect fasteners can result in damage or malfuction, or possibly personal injury. Therefore, fasteners removed should be saved for re-use in the same locations whenever possible. Where the fasteners are not satisfactory for re-use, care should be taken to select a replacement that matches the original. Replacement Parts ^WARNING Electrical, ignition and fuel system components on MerCruiser Engines and Stern Drives are designed and manufactured to comply with U.S. Coast Guard Rules and Regulations to minimize risks of fire or explosion.

Use of replacement electrical, ignition or fuel system components, which do not comply to these rules and regulations, could result in a fire or explosion hazard and should be avoided. When servicing the electrical, ignition and fuel systems, it is extremely important that all components are properly installed and tightened.

If not, any electrical or ignition component opening would permit sparks to ignite fuel vapors from fuel system leaks, if they existed. Engine Mechanical Components Many of the engine mechanical components are designed for marine applications. Unlike automotive engines, marine engines are subjected to extended periods of heavy load and wide-open-throttle operation, therefore, require heavy-duty components. Special marine engine parts have design and manufacturing specifications which are required to provide long life and dependable performance.

Marine engine parts also must be able to resist the corrosive action of salt or brackish water that will rust or corrode standard automotive parts within a short period of time. Failure to use recommended Quicksilver service replacement parts can result in poorengine performance and/or durabiltiy, rapid corrosion of parts s jbjected to salt water and possibly complete failure of the engine. Use of parts other than recommended service replacement parts will void the warranty on those parts which are damaged as a result of the use of other than recommended parts.