Seiko Clock Model No Qhr016 Manual
Seiko QHR020WLH Instruction Manual QHR020WLH INSTRUCTION MANUAL PRECAUTIONS • Do not expose the clock to extreme temperatures, direct sunlight, water or severe shock. • Avoid contact with any corrosive materials such as perfume, alcohol or cleaning agents. • Do not subject the clock to excessive force, shock dust, temperature or humidity. Any of these conditions may shorten the life of the clock.
Seiko instruction manual seiko clock--Model No. Need instruction manual. Thank you - Watches question.
• Do not tamper with any of the intemal components of the clock. This will invalidate the warranty and may cause damage. When there is radio frequency interference, the clock may be unable to obtain communication link and can only return to the normal condition when the interference stops.
STANDARD TIME / DAYLIGHT SAVINGS TIME • The clock will change to the standard time / daylight savings time automatically when the time signal is received. The display will show 'DST' during the summer. POOR RECEPTION • If for some reason your clock does not set itself automatically within 24 hours, it is probably due to poor reception. This is normally a temporary condition. Try another location in the room or move to another room. If possible, locate the clock near a window.
If you would like to set the clock manually while waiting for the automatic time setting, follow the manual setting instructions. NON-RADIO OPERATION • If you live in an area where the signal is not received (Alaska, Hawaii, etc) you can still use your clock as a non-radio controlled clock by following the manual setting instructions. MANUAL SETTING INSTRUCTIONS • Press and hold 'SET' button for 2 seconds until the hour digit flashes. • Press 'ADJUST' button to change the value of the hour digit.
Press and hold 'ADJUST' button to increase quickly. • Press the 'SET' button once, the minute digits will flash. Press 'ADJUST' button to change the minute value. • Press the 'SET' button once, the second digits will flash. Press 'ADJUST' button to set the second value to O. • Press the 'SET' button, '12H' or '24H' will flash.
Press 'ADJUST' button to switch the time format. • Press the 'SET' button once, the month digits will flash. Press 'ADJUST' button to set the month. • Press the 'SET' button once, the date digits will flash. Press 'ADJUST' button to set date. The weekday will synchronize with the date automatically. • Press the 'SET' button once, the year digits will flash.
Press 'ADJUST' button to change the year value. • Press the 'SET' button once, the date digits will flash. Press 'ADJUST' button to choose from 5 languages weekday settings. The 5 languages weekday settings are represented by the below abbreviations: GB=English FR=French DE=German ES=Spanish IT=ltalian • After setting, press the 'MODE' button once to end the setting.
SETTING THE ALARM • In the Normal Time Display, press 'MODE' button to enter the Alarm Setting Mode. • Hold the 'SET' button for 2 seconds until the hour digit flashes. • Press 'ADJUST' button to change the hour value of the alarm time. • Press 'SET' button again, the minute digits will flash. Press 'ADJUST' button to change the minute value of the alarm time. • Press 'MODE' button to exit the setting mode. NOTE: The alarm will be automatically activated after setting the alarm time.
USING THE ALARM AND SNOOZE FUNCTION • Set the alarm time as described in the previous section. • In Alarm Setting Mode, activate the alarm by pressing the 'ADJUST' button so that the alarm icon' ((.,)) ' appears. • Activate the snooze function by pressing the 'ADJUST' button twice so that the snooze icon 'Zz' appears. • To de-activate the alarm and snooze, press the 'ADJUST' button until both icons disappear. NOTE: • When the snooze function is activated, the alarm will ring for 5 times in 4-minute intervals.
The alarm duration is 60 seconds. The 'Zz' icon will keep flashing during the whole alarm and snooze period. Pressing any button will temporarily stop the alarm. To stop the alarm function completely, de-activate the alarm as described in the previous section. • When the snooze function is not activated, pressing any button will stop the alarm completely. The alarm will ring again 24 hours later. TO TOGGLE BETWEEN DATE/MONTH AND YEAR DISPLAY • Press the 'ADJUST' button in Normal Time Display to toggle between DATE/MONTH and YEAR display.
TO TOGGLE BETWEEN °C / OF • Press °C / OF button once to toggle between °C and OF formal. USING THE WALL-MOUNTED FUNCTION • The clock has both desktop and wall-mounting structure. You can place it on the desktop by its stand or hang it on the wall by its recessed hole. Perkins 1100d Service Manual.
Greetings and WELCOME to the site, rustybear! I moved your question out of Introductions to this forum topic area so that it will be more likely to be noticed and addressed by those who are best able to answer it. Your question will get noticed much more here. Introductions is for people to introduce themselves only, and we try to not ask questions there.
We would appreciate it if you would return to Introductions sometime to tell us a little bit about yourself, if you would be willing to do that. Greetings and WELCOME to the site, rustybear!
- by admin